1976-1986 Jeep Wrangler CJ Motobilt

Motobilt Heavy Duty Rear Cross Member for '76-'86 Jeep CJ7

Motobilt Heavy Duty Rear Cross Member for Jeep CJ7 The Motobilt rear Jeep CJ (1976-1986) cross me...

Motobilt Heavy Duty Rear Cross Member for Jeep CJ7 The Motobilt rear Jeep CJ (1976-1986) cross member is a perfect solution for those wanting to replace a bent or rusted out factory rear cross member. Over the years we have seen many Jeep Wrangler CJ's needing a replacement for the rear cross member. Often times due to someone attaching a snatch strap or chain to the thin factory Jeep cross member. Other cases have been due to rust. Either way the Motobilt rear cross member is a great alterna...

Motobilt Full Width Front Axle Conversion Kit w/ Stinger Bumper for '76-'86 Jeep CJ7

Motobilt Full Width Front Axle Conversion Kit for Jeep CJ7 The Motobilt Jeep CJ full width axle c...

Motobilt Full Width Front Axle Conversion Kit for Jeep CJ7 The Motobilt Jeep CJ full width axle conversion kit is a simple way to install a Chevy Dana 44 or Dana 60 front axle in your Jeep CJ. This kit also works with older model Ford 44 and 60 fronts from the 78/79 range. This kit fits Jeep CJ's from 1976 to 1986.  The measurement from center pin to center pin on your front axle needs to be between 31 1/2 inches to 32 inches. Motobilt offers high quality fabricated parts for the DIY fabricat...

Motobilt Wheelbase Rear Stretch Kit for '76-'86 Jeep CJ7

Motobilt Wheelbase Rear Stretch Kit for Jeep CJ7 The Motobilt Jeep CJ Wheelbase Stretch Kit is de...

Motobilt Wheelbase Rear Stretch Kit for Jeep CJ7 The Motobilt Jeep CJ Wheelbase Stretch Kit is designed to use Jeep XJ rear leaf springs on the rear of your Jeep CJ (1976-1986). Installing this kit moves the rear axle back about 6 inches. The kit incorporates a custom rear bumper and shackle hangers in one part. The shackle hangers are positioned high on the bumper to keep the overall Jeep ride height lower for better center of gravity. The ends of the bumper are tapered in to allow better cl...

Motobilt Cowl Armor - Bare Steel for '76-'86 Jeep CJ7 / '87-'95 Wrangler YJ

Motobilt Cowl Armor - Steel for Jeep CJ / YJ Pushing your Jeep YJ / CJ hard off-road will eventua...

Motobilt Cowl Armor - Steel for Jeep CJ / YJ Pushing your Jeep YJ / CJ hard off-road will eventually lead to body damage.  The cowl area between the hood and windshield seems to be a magnet for trees and rocks to get into it. Motobilt offers a solution to protect the Jeep YJ / CJ cowl area with our cowl armor.  The cowl armor is fabricated in house at Motobilt from high quality 3/16” steel plate.  The cowl armor is installed with 5/16” bolts and depending on your setup rivnuts may have to be ...

Motobilt Rear Rock Crawler Bumper (No Receiver) for '76-'86 Jeep CJ7 / '87-'95 Wrangler YJ / '97-'06 Wrangler TJ / '04-'06 Wrangler LJ

Motobilt Rear Rock Crawler Bumper (No Receiver) for Jeep CJ / YJ / TJ / LJ Motobilt offers high q...

Motobilt Rear Rock Crawler Bumper (No Receiver) for Jeep CJ / YJ / TJ / LJ Motobilt offers high quality American made products. Unlike some of the cheaper brands outsourcing their production overseas we aim to keep jobs here in the USA. We take great pride in fabricating the Motobilt product line. Take a look at our Motobilt Jeep rear bumper. We weld out each bumper here at Motobilt paying close attention to detail. The Motobilt rear bumper for the Jeep CJ, YJ, or TJ was designed with functio...

Motobilt Mid-Width Front Bumper for '76-'86 Jeep CJ7

Motobilt Mid-Width Front Bumper for Jeep CJ7 Check out the Motobilt Jeep CJ mid width fabricated ...

Motobilt Mid-Width Front Bumper for Jeep CJ7 Check out the Motobilt Jeep CJ mid width fabricated steel front bumper. The bumper was designed with both function and form in mind. The Motobilt 42-inch-wide Jeep CJ front bumper is considered a mid-width bumper. It is wider than a stubby but shorter than the full width factory length bumpers. The bumper is designed to fit the Jeep CJ from 1976 to 1986. The bumper is 3D CAD designed and formed for precision fit. The bumper is fabricated from 3/16-...