2007-2018 Jeep Wrangler JKU 4 Door Evo Manufacturing
EVO MFG Rockskins (Black) for '07-'18 Jeep Wrangler JKU 4door EVO-1047-4DBT
JKU Rockskins (Black) Steel Fits the following applications: '07-'18 Jeep Wrangler JKU 4 Door Par...
JKU Rockskins (Black) Steel Fits the following applications: '07-'18 Jeep Wrangler JKU 4 Door Part #: EVO-1047-4DBT The EVO MFG Rock Skins are side armor plates are laser cut from 3/16 steel and CNC bent.They are a bolt on installation with stainless steel hardware.These can be used with all factory Jeep sliders and steps as well as all aftermarket frame mounted rock sliders.The Rock Skins protection contours around stock and aftermarket fenders (factory mounting location). This will give the...
EVO MFG Rocksliders (Raw) for '07-'18 Jeep Wrangler JKU 4door EVO-1048-4D
JKU Rocksliders (Raw) Steel EVO MFG RockSliders are manufactured from 3/16-inch laser-cut steel p...
JKU Rocksliders (Raw) Steel EVO MFG RockSliders are manufactured from 3/16-inch laser-cut steel plate and 1.75OD x .120 DOM Tubing. They weld on to the factory frame of the JK to protect the sides and under body from trail damage. The EVO RockSliders are strong enough to support the weight of the vehicle and can be used as a jacking point for a Hi-Lift Jack. The EVO RockSliders offer a sleek, low profile design that will compliment and protect 4 Door Jeep Wrangler JKs.EVO MFG RockSliders are ...
EVO MFG JK ARB Air Compressor Mount For '07-'18 Jeep Wrangler JK JKU EVO-1097
JK ARB Air Compressor Mount Fits the following applications: '07-'18 Jeep Wrangler JK & JKU P...
JK ARB Air Compressor Mount Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1097 Cleanly mounts the ARB Small And Large Compressor (Not The Twin) under the JK hood in a well placed and easily accessible location. Mounts directly the factory brake booster and fender bolts allowing for a simple and quick installation with common tools. Does not block and allows full access to master cylinder fill and level check.Direct Bolt In Using Factory Hardware. Powdercoa...
EVO MFG HiLift Jack Tailgate Mount (Black) For Jeep Wrangler JK JKU JL JLU
JK/JL HiLift Jack Tailgate Mount (Black) Fits the following applications: '07-'18 Jeep Wrangler J...
JK/JL HiLift Jack Tailgate Mount (Black) Fits the following applications: '07-'18 Jeep Wrangler JK & JKU2018-Current Jeep Wrangler JL & JLU Part #: EVO-3020B EVO-3020B is designed to work on both JK and JL stock tailgates and on JK or JL EVO MFG HD Hinge Tire Carriers1/8” Boxed Welded Steel ConstructionPowdercoated black for Clean Finish and Corrosion PreventionIntegrated CB Antenna/ Trail Flag MountSecure Hand Screw for Easy Install and Removal of Hi-Lift JackEasy InstallThe EVO MFG ...
EVO MFG 1/4 Pounder Offset Fairlead Light Mount For Jeep JK/JL/JT EVO-1105B
1/4 Pounder Offset Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangler JK...
1/4 Pounder Offset Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangler JK/JKU'18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-1105B For use with bumper that have offset fairlead openings.Specific use with the EVO-1112 1/4 Pounder Front Bumper.Made from 3/16" steel. Pre cut holes to fits most lights and typical 10" light bars. Powdercoated texture black for a clean finish and corrosion protection.
Pro Series JK Centered Fairlead Light Mount
Pro Series JK Centered Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangle...
Pro Series JK Centered Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1134 3/16” Steel plate construction for use with EVO MFG Pro Series bumpers and center mounted winch applications. Predrilled holes for mounting of lights and most 10" light bars.CNC laser cut and formed with precision CNC press brakeEasy installationFits 2007+ Jeep Wrangler JK and JK UnlimitedINSTALLATION TIME: 0.5-1 Hour
EVO MFG Vacuum Pump Relocation Kit for '12-'18 Jeep Wrangler JK/JKU
2012+ Vacuum Pump Relocation Kit for JK/JKU Fits the following applications: '07-'18 Jeep Wrangle...
2012+ Vacuum Pump Relocation Kit for JK/JKU Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1096 EVO MFG JK Vacuum Relocation is a simple install with factory hardware and works with all bumpers.Relocates factory vacuum cylinder to allow for all winch applicationsNo drilling is requiredINSTALLATION TIME: 1-2 Hours
EVO MFG Tailgate Antenna Mount (Driver) for '07-'18 Jeep Wrangler JK JKU
Tailgate Antenna Mount (Driver) for JK/JKU Fits the following applications: '07-'18 Jeep Wrangler...
Tailgate Antenna Mount (Driver) for JK/JKU Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1122DB Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flagsWorks with factory tire carrier, bare factory tailgate, EVO MFG Gate Plate, and EVO MFG Gate Plate Vent DeleteNo Drilling requiredEasy InstallPowdercoated for clean finish and corrosion protectionNotes:Please be sure to follow antenna manufacturers install instructions for prope...
EVO MFG Tailgate Antenna Mount (Passenger) for '07-'18 Jeep Wrangler JK JKU
Tailgate Antenna Mount (Passenger) for JK/JKU Fits the following applications: '07-'18 Jeep Wrang...
Tailgate Antenna Mount (Passenger) for JK/JKU Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1122PB Offers a 9/16" mounting hole for mounting CB antenna, race radio antenna, or trail flagsWorks with factory tire carrier, bare factory tailgate, EVO MFG Gate Plate, and EVO MFG Gate Plate Vent DeleteNo Drilling requiredEasy InstallPowdercoated for clean finish and corrosion protectionNotes:Please be sure to follow antenna manufacturers install instructions for pr...
EVO MFG Pro Series Offset Fairlead Light Mount '07-'18 Jeep Wrangler JK JKU
Pro Series JK Offset Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangler ...
Pro Series JK Offset Fairlead Light Mount Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1135 3/16” Steel plate construction for use with EVO MFG Pro Series bumpers and offset mounted winch applications.Predrilled holes for mounting of lights and most 10" light bars.CNC laser cut and formed with precision CNC press brakeEasy installationFits 2007+ Jeep Wrangler JK and JK UnlimitedINSTALLATION TIME: 0.5-1 Hour
EVO MFG Rockstar Skids for '07-'18 Jeep Wrangler JK JKU EVO-1038
EVO MFG Rockstar Skids Fits the following applications: '07-'18 Jeep Wrangler JK 2 Door'07-'18 Je...
EVO MFG Rockstar Skids Fits the following applications: '07-'18 Jeep Wrangler JK 2 Door'07-'18 Jeep Wrangler JKU 4 Door Part #: EVO-1038 These rear lower control arm skids with shock relocation bracket built in will give you 1.5 inches of increased ground clearance under the lower control arm and raise the lower shock mount 2 inches for max articulation.• Bolt on• Laser Cut, CNC Bent 3/16 Steel Plate• Adds 1.5" of much needed ground clearance• Allows for maximum use of shock travel under arti...
EVO MFG Rear Rocks Stop King AirBump Bumpstop Kit '07-'18 Jeep Wrangler JK JKU
JK Rear Rocks Stop King AirBump Bumpstop Kit (Blue) Fits the following applications: '07-'18 Jeep...
JK Rear Rocks Stop King AirBump Bumpstop Kit (Blue) Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1060S The EVO JK Rocks Stops is a rear air bump system specifically designed to fit with the 2007 and newer Jeep Wrangler JK. The addition of Air bumps allow for suppressed bottoming out forces which therefore transfers less motion and jarring to the driver’s seat. This kit works with stock JK’s and all lift kits of any height. The EVO Rear Rock Stops will fit al...
EVO MFG Rear Bumpstop Spacer 4" Kit for Jeep Wrangler JK/JL EVO-1066-4
JK/JL Rear Bumpstop Spacer 4" Kit Fits the following applications: '07-'18 Jeep Wrangler JK/JKU'1...
JK/JL Rear Bumpstop Spacer 4" Kit Fits the following applications: '07-'18 Jeep Wrangler JK/JKU'18-Current Jeep Wrangler JL/JLU Part #: EVO-1066-4 4" height JK/JL rear bumpstop extensions are manufactured from 3/16" Steel and internally gusseted for increased strength. Directly bolts to factory axle bump pad with supplied hardware. Sold in pairs for one complete rear axle.
EVO MFG Rear Trackbar/Roll Center Correction Kit for '07-'18 Jeep Wrangler JK
JK Rear Roll Center Correction Trackbar Bracket Fits the following applications: '07-'18 Jeep Wra...
JK Rear Roll Center Correction Trackbar Bracket Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1072B Features:• Raises rear trackbar at axle correcting roll center after lifting the vehicle• Correcting Roll Center improves on and off road handling• Restores axle to its centered location• Bolt on design• Integrated light mount for rocklight installations• Can be used with factory or adjustable trackbar• Powdercoated Black for corrosion resistance• All hardware ...
EVO MFG Front Shock Relocation Bracket Kit for '07-'18 Jeep Wrangler JK JKU
JK Front Shock Relocation Bracket Kit Gain shock clearance between the frame and larger aftermark...
JK Front Shock Relocation Bracket Kit Gain shock clearance between the frame and larger aftermarket shocks on the front of your JK with the use of these EVO JK Front Shock Relocation Brackets. This kit also increases shock clearance with frame when longer lift shocks are installed at extreme flex situations.Powder coated black finishGrade 8 hardware includedBolt-on installationMinor drilling/enlarging of 4 existing holes required.Installation Time:1-2 Hours
EVO MFG Multi Position Spanner Wrench 2.0" EVO-MPS2.0
Multi Position Spanner 2.0" Fits the following applications: '07-'18 Jeep Wrangler JK & JKU P...
Multi Position Spanner 2.0" Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-MPS2.0 EVO Multi Position Spanner (MPS) is a spanner tool for adjusting coilover spring collars.Uniquely used with any 3/8” ratchet wrench, through its ratcheting action, the EVO MPS allows for use at a variety of handle/ wrench angles giving the user an extremely broad range of adjustment positioning in tight coilover mountings.The EVO MPS is constructed from steel to withstand the abu...