0

EVO MFG

EVO MFG NV2514 Rear Bolt-On Coilover Kit - '18+ Jeep Wrangler JL JLU

JL & JT NV2514 Rear Bolt-On Coilover Kit Fits the following applications: '18-Current Jeep Wr...

JL & JT NV2514 Rear Bolt-On Coilover Kit Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part #: EVO-3029B With the same philosophy in mind as the front, we set out to build the most high performance rear coilover kit for the JL. We took the outboard mounting to whole new level but reinforcing both upper and lower mounts keeping the shocks slight reward mounting, optimizing travel without sacrificing the motion ratio. We, with the aid of King Shock Technologies built a s...

$2,820.25

EVO MFG NV2514 Front Bolt-On Coilover Kit - '18+ Jeep Wrangler JL & Gladiator JT

JL & JT NV2514 Front Bolt-On Coilover Kit Fits the following applications: '18-Current Jeep W...

JL & JT NV2514 Front Bolt-On Coilover Kit Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3028B With the release of the JL Wrangler/JT Gladiator and EVO Manufacturing’s history in providing the most proven high-performance Jeep Wrangler Coilover suspension systems, we knew this high-performance product must continue the JL. Our primary focus from the moment we started this project was to build the most high-performance largest whe...

$3,199.00

EVO MFG Protek Rear Shock Skids for '18-Current Jeep Wrangler JL JLU EVO-3026B

JL Protek Rear Shock Skids Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part...

JL Protek Rear Shock Skids Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part #: EVO-3026B Features:The lower rear shock and control arm mount on the JL is the lowest and most vulnerable component for impact and damage while on the trail.  The EVO MFG JL ProTek Rear Shock Skids give the strength and protection needed to help protect your expensive and important suspension components.  Fully bolt on with no required cutting, drilling or welding, these skids box in the rear ...

$149.99

EVO MFG 3.5" Rear Plush Ride Spring Set for '18-Current Jeep Wrangler JL JLU Gas

JL 3.5" Rear Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/...

JL 3.5" Rear Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU Gas Part #: EVO-3024 Features:The EVO Plush Ride JL/JLU Lift Coils give a smooth linear ride on and off road while giving additional lift with increased performance and payload capacity. These kits come with a set of 2.5” or 3.5” Plush Ride Lift Springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. Lift is...

$248.05

EVO MFG 3.5" Front Plush Ride Spring Set for '18-Current Jeep Wrangler JL JLU Gas

JL 3.5" Front Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL...

JL 3.5" Front Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU Gas Part #: EVO-3023 Features:The EVO Plush Ride JL/JLU Lift Coils give a smooth linear ride on and off road while giving additional lift with increased performance and payload capacity. These kits come with a set of 2.5” or 3.5” Plush Ride Lift Springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. Lift i...

$248.05

EVO MFG 2.5" Rear Plush Ride Spring Set for '18-Current Jeep Wrangler JL JLU Gas

JL 2.5" Rear Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/...

JL 2.5" Rear Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part #: EVO-3022 Features:The EVO Plush Ride JL/JLU Lift Coils give a smooth linear ride on and off road while giving additional lift with increased performance and payload capacity. These kits come with a set of 2.5” or 3.5” Plush Ride Lift Springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. Lift is bas...

$248.05

EVO MFG 2.5" Front Plush Ride Spring Set for '18-Current Jeep Wrangler JL JLU Gas

JL 2.5" Front Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL...

JL 2.5" Front Plush Ride Spring Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part #: EVO-3021 Features:The EVO Plush Ride JL/JLU Lift Coils give a smooth linear ride on and off road while giving additional lift with increased performance and payload capacity. These kits come with a set of 2.5” or 3.5” Plush Ride Lift Springs specific to each corner which will keep the Jeep Wrangler JL Level side to side and will maintain a unique and compliant ride quality. Lift is ba...

$248.05

EVO MFG High Clearance Long Arm Upgrade for '18-Current Jeep Wrangler JLU 4 Door

JLU High Clearance Long Arm Upgrade Fits the following applications: '18-Current Jeep Wrangler JL...

JLU High Clearance Long Arm Upgrade Fits the following applications: '18-Current Jeep Wrangler JLU 4 Door Part #: EVO-3010 The EVO MFG JLU High Clearance Long Arm upgrade kit through specifically designed bracketry allows for ultimate in suspension and chassis clearance, larger wheel travel ability, optimal suspension geometry with increased ride quality.Clearance, ride quality, performance and ease of installation was our focus in creating this long arm suspension system. The front arms moun...

$3,038.60

EVO MFG Front Upper Control Arms for '18+ Jeep Wrangler JL/JLU & Gladiator JT

JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler J...

JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3007B EVO MFG JL/JT Enforcer Front Upper Control Arms are made of 1.25” OD x .188 Wall DOM Tubing. Johnny Joints are used to allow for maximum articulation without the bind and spring rate of bonded rubber. Adjustable in length to allow for caster correction during alignments and when used with EVO Enforcer Lower Control Arms allow for front axle posi...

$390.00

EVO MFG Front Lower Control Arms for '18+ Jeep Wrangler JL/JLU & Gladiator JT

JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler J...

JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3006B EVO MFG JL/JT Enforcer Front Lower Control Arms are made of 1.75” OD x .313 Wall DOM Tubing. Johnny Joints on both ends of each arm allow for maximum articulation without the bind and spring rate of bonded rubber. Adjustable in length to allow for caster correction during alignments. Fully assembled and powdercoated black.Installation Time:1-2 H...

$515.00

EVO MFG 2.5" Rear Shock Extension Set for '18-Current Jeep Wrangler JL JLU

JL 2.5" Rear Shock Extension Set Fits the following applications: '18-Current Jeep Wrangler JL/JL...

JL 2.5" Rear Shock Extension Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU Part #: EVO-3005B Features:EVO Rear Shock Extension Set relocate the shock mounting and swaybar mounting hole to adjust for a lifted jeep without the need to replace shocks.  Multiple holes provided to allow various vertical locations to fit your specific application.  Once shock is lift you have the option of cutting/removing much of the low hanging rear axle bracket to gain additional and much...

$79.99

EVO MFG 2.5 Front Shock Extension Set - '18+ Jeep Wrangler JL/JLU & Gladiator JT

JL & JT 2.5" Front Shock Extension Set Fits the following applications: '18-Current Jeep Wran...

JL & JT 2.5" Front Shock Extension Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3004B Features:EVO Front Shock Extension Set relocates the shock mounting hole to adjust for a lifted jeep without the need to replace shocks.Installation Time:1-2 Hours

$69.99

EVO MFG Front Overland Control Arm Drop Kit for '20-Current Jeep Gladiator JT

JL & JT Front Overland Control Arm Drop Kit Fits the following applications: '18-Current Jeep...

JL & JT Front Overland Control Arm Drop Kit Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3003B Features:With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the fron...

$248.05

EVO MFG NV2514 Enforcer PRO Stage 4 Plus (Black) for '18+ Jeep Wrangler JL JLU

Wrangler JL/JLU NV2514 Enforcer PRO Stage 4 Plus The EVO MFG JL Enforcer PRO NV2514 kits are high...

Wrangler JL/JLU NV2514 Enforcer PRO Stage 4 Plus The EVO MFG JL Enforcer PRO NV2514 kits are high performance coilover mid arm suspension systems.  We offer this system in 4 buildable configurations to meet most budgets and needs.   JL Enforcer PRO Stage 1 kits include the necessary upgrade suspension parts to convert your JL suspension to front and rear coilovers.JL Enforcer PRO Stage 2 kits include Stage 1 components as well as EVO MFG Enforcer JL Front Lower Adjustable Control Arms to allo...

$8,468.10

EVO MFG NV2514 Enforcer PRO Stage 3 Plus (Black) for '18+ Jeep Wrangler JL JLU

Wrangler JL/JLU NV2514 Enforcer PRO Stage 3 Plus Fits the following applications: '18-Current Jee...

Wrangler JL/JLU NV2514 Enforcer PRO Stage 3 Plus Fits the following applications: '18-Current Jeep Wrangler JL 2 door & JLU 4 Door Part #: EVO-241B-3P The EVO MFG JL Enforcer PRO NV2514 kits are high performance coilover mid arm suspension systems.  We offer this system in 4 buildable configurations to meet most budgets and needs.   JL Enforcer PRO Stage 1 kits include the necessary upgrade suspension parts to convert your JL suspension to front and rear coilovers.JL Enforcer PRO Stage 2 ...

$7,569.00

EVO MFG NV2514 HC PRO Long Arm (Black) - '18+ Jeep Wrangler JLU 4 Door EVO-242B

Wrangler JLU NV2514 HC Pro Long Arm  Fits the following applications: '18-Current Jeep Wrangler J...

Wrangler JLU NV2514 HC Pro Long Arm  Fits the following applications: '18-Current Jeep Wrangler JLU 4 Door Part #: EVO-242B When combining our JLU High Clearance Long Arm kit with the EVO MFG JL Front and Rear NV2514 Coilover kits we create the High Clearance Long Arm PRO. This combination of improved suspension geometry through the EVO MFG JLU High Clearance Long Arm and increased shock travel through our JL Bolt-on NV2514 coilovers, allows you to un-limit the kit and run full shock length y...

$8,650.93