EVO MFG
EVO MFG A Pillar Light Mounts - '18-Current Jeep Wrangler JL & '20+ Gladiator JT
JL & JT A Pillar Light Mounts Fits the following applications: '18-Current Jeep Wrangler JL/J...
JL & JT A Pillar Light Mounts Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3109BFinish: Powdercoat Black Simple bolt on install to 2018-2021 Jeep Wrangler JL & JLU and 2020-2021 Jeep GladiatorSteel construction with powder coated black finish.Light mount bolt diameter: 7/16”Note:Compatible with all models (except Mojave)Installation Time:0.5-1 Hour
EVO MFG D44 M210 Advantec Axle Truss Kit - '20-Current Jeep Gladiator JT
JL/JT D44 M210 Advantec Axle Truss Kit Fits the following applications: '18-Current Jeep Wrangler...
JL/JT D44 M210 Advantec Axle Truss Kit Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3051 The EVO MFG JL/JT Dana 44 ProTek Front Axle Truss is specifically designed to give your front axle ample strength to prevent deflection and support the brittle FAD/CAD casting that is integrated into the front axle and prone to failure. The included ¼" steel differential bridge connects left and right truss sections over cast differential cente...
EVO MFG C2 Axle and End Forging Gusset Set - '18-Current Jeep Wrangler JL JLU
JL/JT C2 Axle End Forging Gusset Set Fits the following applications: '18-Current Jeep Wrangler J...
JL/JT C2 Axle End Forging Gusset Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3050 The EVO MFG JL / JT C2 Axle Gussets are designed to backbone the axle end forging "Cs" with CNC formed 3/16" laser cut steel on both upper and lower axle Cs keeping them supported and alignments in check. These gussets are a direct fit to JL axle in all models Dana 44 Rubicon (M210) and Dana 30 Sahara/Sports (M186), both JL/JLU / and JT. Wiring r...
EVO MFG Protek Front Axle Disconnect Skid - '18-Current Jeep Wrangler JL JLU
JL/JT Protek Front Axle Disconnect Skid Plate FAD CAD Fits the following applications: '18-Curren...
JL/JT Protek Front Axle Disconnect Skid Plate FAD CAD Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3042B The Jeep Wrangler JL/JLU/JT front axle is manufactured with a CAD Center Axle Disconnect (also called FAD). This feature is designed to improve fuel economy but does add a vulnerable load bearing casting to long side of the JL/JLU/JT front axle tube. Castings are known to be delicate to impact loads and being that impacts of the...
EVO MFG Front HD 16.5"-17.9" Endlinks for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-16.5 Length: 16.5" - 17.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made...
EVO MFG Front HD 14.5"-15.9" Endlinks for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-14.5 Length: 14.5" - 15.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made...
EVO MFG Front HD 13.5"-14.9" Endlinks for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-13.5 Length: 13.5" - 14.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-10.5 Length: 10.5" - 11.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made...
EVO MFG Front HD 7.5"-8.9" Endlinks for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-7.5 Length: 7.5" - 8.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made of...
EVO MFG Front HD 5.5"-6.9" Endlinks for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front HD Swaybar Endlinks Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3136-5.5 Length: 5.5" - 6.9" 2007-2018 Jeep Wrangler JK/JKU's use EVO-1036 sets on the front and rear sway bars.2018-2020 Jeep Wrangler JL/JLU's use EVO3136 set on the front swaybar and EVO-1036 set on the rear swaybar.2020 Jeep Gladiator JT use EVO3136 set on the front swaybar and EVO-3137 seton the rear swaybar.EVO HD Sway Bar End Links are made of...
EVO MFG Front Double Throwdown D60 Kit - '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front Double Throwdown Kit with King Coilovers, Bypasses and Airbumps Fits the follow...
JL & JT Front Double Throwdown Kit with King Coilovers, Bypasses and Airbumps Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3092B-S60 The EVO MFG JL/JT Front Double Throwdown Kit is the top tier “do it all” suspension system offered when it comes to suspension travel, quality and absolute race proven performance.Key Features:The EVO MFG Front Double Throwdown produces the most wheel travel achievable out of the JL Wrangler and J...
EVO MFG Front Adjustable Trackbar for '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Front Adjustable Trackbar Fits the following applications: '18-Current Jeep Wrangler ...
JL & JT Front Adjustable Trackbar Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3047B The EVO MFG Jeep Wrangler JL and Gladiator JT Enforcer Adjustable Front Trackbar is made of extremely thick DOM Steel Tubing utilizing a combination of a rubber bushing one end and spherical bearings. These give the fine tuning of axle center left to right and rigid strength to keep it that way. These maintain correct geometry and can be used ...
EVO MFG Protek Front Shock Relocation Kit - '18+ Jeep Wrangler JL & Gladiator JT
JL & JT Protek Front Shock Relocation Brackets Fits the following applications: '18-Current J...
JL & JT Protek Front Shock Relocation Brackets Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3027B Installation Time:1-1.5 Hours
EVO MFG Front Lower Control Arms for '18+ Jeep Wrangler JL/JLU & Gladiator JT
JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler J...
JL & JT Front Lower Control Arms Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3006B EVO MFG JL/JT Enforcer Front Lower Control Arms are made of 1.75” OD x .313 Wall DOM Tubing. Johnny Joints on both ends of each arm allow for maximum articulation without the bind and spring rate of bonded rubber. Adjustable in length to allow for caster correction during alignments. Fully assembled and powdercoated black.Installation Time:1-2 H...
EVO MFG 2.5 Front Shock Extension Set - '18+ Jeep Wrangler JL/JLU & Gladiator JT
JL & JT 2.5" Front Shock Extension Set Fits the following applications: '18-Current Jeep Wran...
JL & JT 2.5" Front Shock Extension Set Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3004B Features:EVO Front Shock Extension Set relocates the shock mounting hole to adjust for a lifted jeep without the need to replace shocks.Installation Time:1-2 Hours
EVO MFG Front Overland Control Arm Drop Kit for '20-Current Jeep Gladiator JT
JL & JT Front Overland Control Arm Drop Kit Fits the following applications: '18-Current Jeep...
JL & JT Front Overland Control Arm Drop Kit Fits the following applications: '18-Current Jeep Wrangler JL/JLU'20-Current Jeep Gladiator JT Part #: EVO-3003B Features:With the use of the included Overland Control Arm drop brackets while lifted we maintain factory flat control arm angle alleviating much of the chop associated with lifting a Jeep giving even better and more improved ride quality. Also in the use of Overland Drop Brackets we are able to engineer more performance into the fron...