Integrated fuse box holder and evap solenoid holder
Best quality wires, tin-plated copper connectors, and sealed heat shrink tubing
Powder coated for durability
Proudly made in the USA
The top cover plate has several innovative features in a simple package. All of the wiring has already been done for you, and the smart isolator comes pre-installed. The welded gussets on top have holes with grommets to route the wires directly to the correct battery post, so there's no guess work involved to make the connections. Use the extra grommets for routing your own accessory wires cleanly and neatly to the power and ground bus bars. High quality battery terminal connectors are crimped to the flexible 2 gauge wire connecting the batteries together. With all the wiring integrated into the top plate, servicing your batteries has never been easier. Simply pull the terminals off the battery posts, remove the 4 easily accessible bolts securing the lid, and all the wiring can be lifted up and out of the way to service your batteries when necessary.
The included smart isolator gives you automatic control of all the charging functions with no interaction required.
Here's how it works.
When both your batteries are fully charged at 13.2 volts, they are automatically connected and are charged at the same time.
When you park and turn off the engine, but continue to use accessories such as lights or the stereo or a CB, both batteries begin to drain down.
When your main cranking battery reaches 12.7 volts, the smart isolator separates the batteries, so that your cranking battery will have enough power to start the engine. The second battery continues to power your accessories for as long as it will last.
After you crank the vehicle, your main cranking battery will be charged up to 13.2 volts first, and then the isolator will begin charging your accessory battery. By only charging one battery at a time, your alternator is protected from excessive strain.
What if your cranking battery is somehow drained down too low to be able to start the vehicle? We have a solution for that.
Press the Start Boost button and the isolator will connect both batteries together for 1 minute, acting like built-in jumper cables to jump start your engine off your accessory battery.
As long as the accessory battery has enough power, you'll be able to start your vehicle instead of being stranded with a dead battery!
The alternator will charge both batteries for 1 minute, then switches back over to automatic mode to reduce the strain on your alternator.
Also includes high amp power AND ground bus bars. The bus bars are already pre-wired to the accessory battery. Now you can quickly and easily connect your winch, lights, amplifiers, and lots more while keeping the wiring neat and orderly. Your winch or other high-amp accessories go onto the large center post on the bus bars, and all your other accessories go directly to the smaller screw terminals on the bus bars.
NOTE:2007-2011 model years require a short extention cable for the evap solenoid. The extension is made with OEM connectors and wires to ensure a perfect watertight fit for easy installation. This piece is not required on 2012+ JKs. Be sure to specify your year model when ordering.
AnyGroup 34size battery will fit our tray (Note the 34R is not compatible - the posts are reversed and will not line up with the wires)
For your convenience, we offer the Odyssey 34-PC1500T, an excellent battery that has the most cranking amps and reserve capacity of any brand
NOTE: Batteries ordered through Genesis Offroad will ship separately from an Odyssey warehouse in California.
Optima Red Top is a good engine starting battery, but not recommended or warranted for use in deep cycle applications. 800 CCA, 50 Ah capacity, 100 minute reserve time
Optima Yellow Top is a good high power, dual purpose engine start and deep cycle battery. 750 CCA, 55 Ah capacity, 120 minute reserve time
Odyssey 34-PC1500T is for those who need the most capacity possible! 850 CCA, 68 Ah, and 135 reserve time
The original factory battery will not fit due to its larger size
Both batteries must be the same physical size for the top lid to securely hold them in place
Our dual battery kit comes with a smart isolator and solenoid rated to handle a continuous 200 amps of current flowing through it. It will handle current spikes of up to 750 amps for up to 30 seconds.
Optional G Screen Monitoring System
Need to keep a closer eye on your batteries? Check out our dual battery monitoring system - theG Screen.
Voltage levels for each battery
Remote status indicator
Background color changes based on battery status
Remote boost button
Completely pre-wired for you!
Multiple mounting options (A pillar, dash, or in an sPod over the rear view mirror)
Order with your battery kit to combine shipping
Detailed Installation Instructions
Motorhead Garage tv features Genesis Offroad
Genesis Offroad at Overland Expo East 2014 - Dual battery kit and G Screen Overview
Genesis Offroad JK Dual Battery Kit Overview
Fits all Jeep JKs, 2007 - presentNote07-11 models require an extension cable for relocating the evap solenoid Engine compatability:
European diesel engines (left hand drive only)
Hemi engines - 5.7L, 6.1L, 6.4L
LS engines including the new LS3
Power add-on compatibility
Prodigy Performance Turbo
Not compatible with the River Raider cowl snorkel
Works with aftermarket air intake systems that use the factory air box space.