JK Draglink Flip Kit with HD Raised Trackbar Bracket and Ram Assist Mount
Fits the following applications:
'07-'18 Jeep Wrangler JK & JKU
Part #: EVO-1071RAM
When lifting your JK 3” or greater, it is highly recommended to correct some of the steering geometry that has been altered with the lift. The EVO JK Draglink Flip Kit does just that and more. This system, raises the trackbar mounting location 3” at the axle to help correct roll center and steering angles of a lifted JK. In doing so, roll center (very important component of drivability is greatly improved giving better handling of the vehicle on and off road. This system includes a new forged draglink for top of knuckle mounting and the EVO MFG Front Trackbar bracket with RAM assist bracket assembly. This is used when removing the very weak factory Jeep Wrangler JK front trackbar bracket on both Dana 30 and 44 axles and replace with a extremely strong formed steel, internally gusseted and keyed bracket assembly. This assembly relocates the trackbar vertically to correct roll center and works only with flipped JK draglinks (complete steering kits with this brackets are available, EVO-1071RAM). It can be used with a steering stabilizer or ram assist systems with the included mounting tabs. When installed with a ram assist system, this bracket assembly places the ram in the ideal location, parallel and level with tie rod. This is important to correct steering response and alleviate any unwanted side loading of the tie rod. Additional features include a high clearance design with integrated slopping skid plate and ample welding connection to the axle tubes to insure a strong connection.
Drilling of the passenger side steering knuckle with 13/16” drill bit is required to complete the install.
Cutting and welding is required.
*Builder parts: Bracket kit comes unassembled and requires welding and possibly some adjustments with aftermarket part combinations
Installation Time: 4-6 Hours