Overall height 3 1/4"

Dodge Front Axle
• 1974-1993 Ramcharger
• 1980-2001 1/2 Ton (W150/1500)
• 1988-1995 3/4 Ton (2500 Light Duty)
Ford Front Axle
• 1959-1979 1/2 Ton (F-100/F-150)
• 1980-1996 1/2 Ton (F-150, TTB)
International Harvester Front Axle
• 1971-1980 Scout
Jeep Front Axle
• 1974-1991 Wagoneer
• 1974-1983 SJ
• 2003-2014 Wrangler Rubicon
Jeep Rear Axle
• 2003-2014 Wrangler Rubicon
• 1997-2006 Wrangler (optional: available starting 07/07/1997)
• 2007-2014 Wrangler (optional on 2007, standard '08-present)

Includes: Bolt kit, Drain Plug and Dip Stick.

Capacity: 4 Quarts

Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.

Avoid costly repairs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer

Average of double the fluid capacity

Ease of Service

The dipstick is knurled for quick removal, the flat is marked low/high to check lube level and a magnet, which acts as an open filter is in the lower end. The MS 7/8 - 14 THD port is large enough to use for filling.

The magnet-filled drain plug is the same MS port as the dipstick. Both the dipstick and drain are O-ring sealed.

The sending unit fitting is 1/8 pipe THD and shipped with a stainless pipe plug.

The calibration plug is centered on the serial number plate and approximates the stock cover fill plug for factory fluid level.

The O-ring is snapped into the inverted "V" groove for a positive seal without gasket or silicone.

Plugs, cap screws and washers are stainless steel in most applications.

Mag-Hytec manufactures the best covers and pans available today.