Overall Height @ deepest Side 4 5/8″
This pan is designed to work with the 4 Wheel Drive Filter Only. If you have a 2 wheel drive vehicle you will need the 4 wheel drive filter.
If you have clearance under your transmission IE, No Exhaust cross over pipe, or Cross member interference. You could use the #68RFE for larger Fluid capacity. Many applications could apply upon inspection of these parameters.
*Gasket Seal, with o-ring sealed magnetic Drain Plug.
Includes: Bolt kit, and Drain Plug.
1 1/2 to 2 Quarts more than stock
Heavy Duty differential covers and transmission pans provide increased lubricant and cooling capacity for hard working recreational and service vehicles. Mag-Hytec covers and pans set your vehicle apart in both aesthetics and function - cast in A356-T6 aluminum and texture powder coated black with machined cooling fins. Magnetic drain plugs trap worn gear material promoting fluid integrity. Each unit is fitted with ARP 568 O-rings for superior sealing. All hardware is 303 stainless steel, in most applications no gasket or sealant is required, and all Mag-Hytec parts are covered by a lifetime limited warranty. Depend on Mag-Hytec when you're pulling a heavy load.
Avoid costly reapirs - Extend the life of your Vehicle - Expand oil Capacity - Runs Cooler, Lasts Longer
• Deep high-capacity sump for maximum cooling
• Magnetic drain plug
• 303 hardware except allen head cap screws are zinc plated
• 1/8 NPT temperature sender port
• Finned aircraft aluminum construction
• Requires only three allen key wrenches (included) for installation and service
• O-rings require no gaskets or sealants*
|Dimensions||17 x 13.5 x 5 in|
|1/2, 3/4, or 1 Ton or Higher||
1 Ton or Higher, 1/2, 3/4
|4X2 / 4X4||
|Auto / Stick||
|Diesel / Gas||
|Single or Dual Rear Tires||
|Truck, Van, Motorhome||
Motorhome, Truck, Van