Synergy Mfg Heavy Duty Adjustable Front Track Bar for '18-Up Jeep Wrangler JL / JLU & '20-Up Jeep Gladiator JT



Product type: Steering



  • GOT QUESTIONS? CALL US (623)-580-8887

Synergy Manufacturing - Jeep JL HD Adjustable Front Track Bar

Fits the following applications:

'18-'Up Jeep Wrangler JL 2 Door
'18-'Up Jeep Wrangler JLU Unlimited 4 Door
'20-'Up Jeep Gladiator JT

Part #: 8875-01

Finish: Grey Powdercoat

Jeep Wrangler JL / JLU / JT Heavy Duty Adjustable Front Track Bar. Adjustable track bars are used to help center your axles when running a suspension lift. This track bar also significantly improves lateral stiffness over stock, and is seen as a required upgrade to eliminate the factory track bar from contributing to steering shimmy or death wobble, even on stock vehicles. Considerably stronger than stock to hold up to the abuse of large tires and aggressive off road driving. Length is adjustable on the vehicle to make adjustments a breeze. Uses maintenance free Synergy Dual Durometer Bushings on both ends. Bent to clear the Synergy Sector Shaft Brace and most aftermarket differential covers. Pair with Synergy's Drag Link, Tie Rod, and Sector Shaft Brace to bullet-proof your steering and guarantee product compatibility from stock height to 3 plus inches of lift.

18+ Jeep Wrangler JL
18+ Jeep Wrangler JLU
20+ Jeep Gladiator JT

Eliminates the track bar from contributing to steering shimmy or death wobble
Allows centering of front axle when running a suspension lift
Adjustable without removing from vehicle
Maintenance Free, no greasing required
Synergy Dual Durometer Bushings eliminate binding issues associated with stock vulcanized bushings
No jam nuts that are impossible to keep tight
No modifications required to install
Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
Compatible with Synergy HD Steering and Sector Shaft Brace
Bent to clear most aftermarket differential covers
Limited Lifetime Warranty

Made from high quality 1.50 inch x .250 wall DOM
Retains factory track bar mounting bolts & hardware
Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing control arm mounting bolt
Features Synergy Dual Durometer Bushings (DDB) with Teflon® bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
100% bolt on components assures an easy, trouble free installation with the use of basic hand tools

Compatible from 0-4 inches of lift in the stock mounting locations with no bump stop spacing required. Front track bar relocation bracket and high steer are recommended for lifts 3 inches and over and require 3 inches of bump stop spacing
The replacement adjustable joint is 4812-01 and the replacement bushings are 4327-01
Min/max lengths: 33.75 / 34.50 inches

WARNING: Operating, servicing and maintaining a passenger vehicle or off-road vehicle can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle.  For more information go to www.P65Warnings.ca.gov