VIAIR Corporation - Continuous Duty OBA System
VIAIR’s Continous Duty Onboard Air System is a pre-packaged compressed air solution that provides an industry-leading, 200 PSI rated, 100% duty cycle 485C CE compressor, 2.5 gallon air tank, and all components needed to install a working system capable of inflating tires of virtually any size.
Fits the following applications:
Universal
Part #: 20002
FEATURES
– 2.5 Gallon VIAIR Air Tank (200 PSI)
– 485C Stealth Black VIAIR Compressor w/ Thermal Overload Protector
– Digital Tire Inflation Gun with 180 PSI Gauge
– 30ft. Inside Braided Black Coil Hose with Quick Connects
– 1/4” NPT Quick Connect Stud (F)
– 1/4” NPT Quick Connect Coupler (F)
– Dash Panel Gauge with ON/OFF Switch
– Sealed Pressure Switch
(165 PSI on, 200 PSI off)
– Reducer 1/8” NPT (F) to 1/4” NPT (M)
– Reducer 3/8” NPT (F) to 1/4” NPT (M)
– 1/4” NPT 250 PSI Safety Valve
– 1/4” NPT Drain Cock
– (3) 1/4” NPT Compression Fittings
– 4” Strip of Grommet Material
– 20ft. 12-Gauge Wire with Inline Fuse Holder
– Electrical Connections
– Accessory Airline
SPECIFICATIONS
– 12-Volt
– Permanent Magnetic Motor
– Duty Cycle: 100% @ 200 PSI
– Max. Working Pressure: 200 PSI
– Max. Air Tank Size: 5.0 Gallon
– Max. Amp Draw: 23 Amps
– Ingress Protection Rating: IP67
– Dimensions: 10.63″L x 4.1″W x 6.44″H
– Net Weight: 11.10 lbs
RECOMMENDED COMPONENTS
– 5.0 Gallon Tank (P/N 91050)
– 12V Relay (P/N 95900)
Please Note:
Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs. Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs