VIAIR Corporation - Dual 425C OBA Gen2 System.

VIAIR’s Gen. 2 Dual 425C Onboard Air System (OBA) is our fastest filling OBA, featuring our new 425C Gen.2 compressors capable of putting out 4.80 CFM at 0 PSI head pressure. The 425C is our first compressor with duty cycle of 33% at 175 PSI and 50% at 100 PSI. This pre-packaged compressed air solution includes: two Platinum or Stealth Black 425C compressors, a 2.5 gallon air tank, an inline pressure regulator, and all necessary components needed to install a working onboard air system.

The 425C features upgraded internal components that make it a true 175 PSI-rated working pressure pump, and has newly designed thicker vibration isolators that absorb vibration and sound. The modern-inspired head design highlights an eye-catching setup. This Gen. 2 Onboard Air System delivers the vital air source for numerous pneumatic applications.

Fits the following applications:

Universal

Part #: 20075

FEATURES
– 2.5 Gallon Matte Black VIAIR Air Tank (200 PSI)
– (2) 425C Platinum or Stealth Black VIAIR Compressors
– Illuminated Dash Panel Gauge Kit, Black Face 200 PSI
– Digital Tire Inflation Gun (180PSI)
– 0-220 PSI Pressure Regulator
– Sealed Pressure Switch (140 PSI on, 175 PSI off)
– 1/4” Drain Cock
– Heavy Duty 80 Amp Relay
– Mini ANL Fuse Holder with 60 Amp Fuse
– 1/4” Quick Connect Coupler (M)
– 1/4” 250 PSI Safety Valve
– (4) 1/4” NPT(M) to 1/4” Airline Straight Push to Connect Fittings
– 6-Port Billet Manifold with Mounting Bracket (1/4”)
– (2) 20ft. 1/4” Air Line Included
– 5 Pc. 1/4” NPT Plugs Kit
– Extension Braided Black Coil Hose
– Rubber Tip Blow Gun
– 3-in-1 Air Down Gauge
– Stainless Steel Air Line Cutter

SPECIFICATIONS
– 12-Volt
– Permanent Magnetic Motor
– Duty Cycle: 50% @ 100 PSI
– Duty Cycle: 33% @ 175 PSI
– Max. Working Pressure: 175 PSI
– Max. Air Tank Size: 5.0 Gallon
– Combined Max. Amp Draw: 60 Amps
– Ingress Protection Rating: IP67
– Dimensions: 9.25″L x 4.14″W x 6.59″H
– Net Weight: 11.10 lbs.

Please Note:
  Use thread sealant for proper installation.
Thread tape is not recommended.
Properly sealed, recommended torque for 1/8” is 10 ~ 11 ft. lbs.
Recommended torque for 1/4” and 3/8” is 16 ~ 18 ft. lbs
All Fittings are NPT rated unless otherwise noted.
Wiring harness NOT included.