2007-2018 Jeep Wrangler JKU 4 Door Evo Manufacturing

EVO MFG High Clearance Long Arm Upgrade Kit for '07-'18 Jeep Wrangler JK JKU

JK High Clearance Long Arm Upgrade Kit EVO MFG Jeep JK High Clearance Long Arm Upgrade kit includ...

JK High Clearance Long Arm Upgrade Kit EVO MFG Jeep JK High Clearance Long Arm Upgrade kit includes the necessary brackets, long arms, and hardware pack.Features:• Welding required, welding will not void warrantee• Proven Johnny Joints• Ability to retain factory high clearance transmission cross-memberThis high clearance long arm suspension upgrade is designed to be used with all Suspension types. Coil Spring, Coilover or Double Throwdown. Notes:2010+ models require exhaust modificationWeldin...

EVO MFG Rear Bolt-On Coilover Kit (Black) For '07-'18 Jeep Wrangler JK JKU

JK Bolt-On LCG Rear Coilover Kit Fits the following applications: '07-'18 Jeep Wrangler JK & ...

JK Bolt-On LCG Rear Coilover Kit Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1109B With a foundation in the first and most proven coilover systems for the Jeep JK, EVO MFG brings you its new LCG Bolt-On Coilover System The EVO MFG LCG Bolt-On Coilover kit comes complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system.  Ultra high clearance mounts gaining 1.5" of clearance ...

EVO MFG Hood Breach, Dual Washer Spray For '07-'18 Jeep Wrangler JK JKU

JK Hood Breach with Dual Washer Spray Fits the following applications: '07-'18 Jeep Wrangler JK &...

JK Hood Breach with Dual Washer Spray Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-1149AL Jeep JK’s are known to run hot, especially while off-road. The EVO MFG JK Hood Breach allows optional ventilation reliefs to increase air flow in the engine compartment allowing for cooler running temperatures. Made from thick Aluminum Alloy sheet and laser cut with ventilation slots, the two piece overlay design of the JK Hood Breach allows for install in as sold raw a...

EVO MFG Rockstar Skids for '07-'18 Jeep Wrangler JK JKU EVO-1038

EVO MFG Rockstar Skids Fits the following applications: '07-'18 Jeep Wrangler JK 2 Door'07-'18 Je...

EVO MFG Rockstar Skids Fits the following applications: '07-'18 Jeep Wrangler JK 2 Door'07-'18 Jeep Wrangler JKU 4 Door Part #: EVO-1038 These rear lower control arm skids with shock relocation bracket built in will give you 1.5 inches of increased ground clearance under the lower control arm and raise the lower shock mount 2 inches for max articulation.• Bolt on• Laser Cut, CNC Bent 3/16 Steel Plate• Adds 1.5" of much needed ground clearance• Allows for maximum use of shock travel under arti...

EVO MFG Rear Bumpstop Spacer 4" Kit for Jeep Wrangler JK/JL EVO-1066-4

JK/JL Rear Bumpstop Spacer 4" Kit Fits the following applications: '07-'18 Jeep Wrangler JK/JKU'1...

JK/JL Rear Bumpstop Spacer 4" Kit Fits the following applications: '07-'18 Jeep Wrangler JK/JKU'18-Current Jeep Wrangler JL/JLU Part #: EVO-1066-4 4" height JK/JL rear bumpstop extensions are manufactured from 3/16" Steel and internally gusseted for increased strength. Directly bolts to factory axle bump pad with supplied hardware. Sold in pairs for one complete rear axle.

EVO MFG Front Shock Relocation Bracket Kit for '07-'18 Jeep Wrangler JK JKU

JK Front Shock Relocation Bracket Kit Gain shock clearance between the frame and larger aftermark...

JK Front Shock Relocation Bracket Kit Gain shock clearance between the frame and larger aftermarket shocks on the front of your JK with the use of these EVO JK Front Shock Relocation Brackets. This kit also increases shock clearance with frame when longer lift shocks are installed at extreme flex situations.Powder coated black finishGrade 8 hardware includedBolt-on installationMinor drilling/enlarging of 4 existing holes required.Installation Time:1-2 Hours

EVO MFG Multi Position Spanner Wrench 2.5" EVO-MPS2.5

Multi Position Spanner 2.5" Part #: EVO-MPS2.5 EVO Multi Position Spanner (MPS) is a spanner tool...

Multi Position Spanner 2.5" Part #: EVO-MPS2.5 EVO Multi Position Spanner (MPS) is a spanner tool for adjusting coilover spring collars.Uniquely used with any 3/8” ratchet wrench, through its ratcheting action, the EVO MPS allows for use at a variety of handle/ wrench angles giving the user an extremely broad range of adjustment positioning in tight coilover mountings.The EVO MPS is constructed from steel to withstand the abuses of your tool box or tool bag and zinc plated with stainless pin ...

EVO MFG High Clearance Long Arm Pro Kit For '07-'18 Jeep Wrangler JK JKU

JK High Clearance Long Arm Pro Suspension System Fits the following applications: '07-'18 Jeep Wr...

JK High Clearance Long Arm Pro Suspension System Fits the following applications: '07-'18 Jeep Wrangler JK & JKU Part #: EVO-202B The EVO MFG Front and Rear LCG Bolt-On Coilover kits come complete with all necessary parts to easily convert the JK from the limited coil and shock system to a far superior performing coilover system. 12”’s of usable wheel travel, custom built brackets for the lowest center of gravity, EVO’s legendary SPEC valving and spring rates specifically dialed in for th...